Basic Business Test Quiz
(184).jpg "Basic Business Test Quiz - Quiz")
Get ready to play this amazing "Basic Business Test Quiz." Every business requires some form of investment and enough customers. The business field has a lot of career opportunities, and if you are looking to venture into a business, there is some basic information you need to understand. Test your business knowledge by taking up the quiz below. Please leave a comment after this test. All the best to you!
Questions and Answers
- 1.
The basic elements of the supply chain include:
- A.
Supply, manufacture, distribution
- B.
Design, manufacture, inventory
- C.
Engineer, design, manufacture
- D.
Supply, engineer, manufacture
Correct Answer
A. Supply, manufacture, distributionExplanation
The correct answer is supply, manufacture, distribution. This answer accurately reflects the sequential flow of activities in a typical supply chain. First, the supply phase involves sourcing raw materials or components needed for production. Then, the manufacture phase involves transforming these inputs into finished goods. Finally, the distribution phase involves delivering the finished products to customers or retailers. This order of activities ensures a smooth and efficient flow of goods from the initial supply to the final customer.Rate this question:
-
- 2.
A company's strategic plan:
- A.
Provides the manufacturing plan for families of end items
- B.
Outlines the sales plan for the next year
- C.
Is a statement of goals and objectives for a long-range period
- D.
Outlines new products for the next year
Correct Answer
C. Is a statement of goals and objectives for a long-range periodExplanation
The correct answer is that a company's strategic plan is a statement of goals and objectives for a long-range period. This means that it is a document that outlines the company's overall vision and direction for the future, typically spanning several years. It includes the company's goals and objectives, which serve as a guide for decision-making and resource allocation. The strategic plan helps the company align its activities and resources towards achieving its long-term goals and objectives.Rate this question:
-
- 3.
In which of the following manufacturing environments would consumer products, such as film, etc., be classified?
- A.
Assemble to order
- B.
Engineer to order
- C.
Make to order
- D.
Make to stock
Correct Answer
D. Make to stockExplanation
Consumer products such as film would be classified in a "Make to stock" manufacturing environment. In this type of environment, products are produced in anticipation of customer demand and are stocked in inventory. The production is not based on specific customer orders but rather on the forecasted demand for the product. This allows for faster delivery to customers as the products are readily available in stock.Rate this question:
-
- 4.
Many different end items are made from a small number of components. What manufacturing environment would this be?
- A.
Make to stock
- B.
Make to order
- C.
Assemble to order
- D.
Engineer to order
Correct Answer
C. Assemble to orderExplanation
In an "assemble to order" manufacturing environment, many different end items are created by assembling a small number of components. This means that the components are produced and stocked in advance, and when an order is received, the items are assembled according to the customer's specifications. This allows for greater flexibility and customization compared to "make to stock," where items are produced in advance and stocked without customization, or "make to order," where items are produced from scratch for each individual order. "Engineer to order" refers to the production of highly customized products designed specifically for each customer.Rate this question:
-
- 5.
Aggregate inventory management is concerned with:
- A.
Managing inventory items and how they are used
- B.
Establishing the production plan
- C.
The cost and benefits of carrying the different classes of inventory
- D.
The distribution network and the movement of inventory
Correct Answer
C. The cost and benefits of carrying the different classes of inventoryExplanation
Aggregate inventory management involves analyzing the cost and benefits associated with different classes of inventory. This includes determining the optimal amount of inventory to carry, considering factors such as storage costs, holding costs, and potential obsolescence. By evaluating the cost and benefits of carrying different classes of inventory, businesses can make informed decisions about inventory levels and allocation, ultimately maximizing profitability and efficiency.Rate this question:
-
- 6.
Which of the following would be included in the cost of carrying inventory? I. Heating and lighting a warehouse II. Obsolete inventory III. Labor to move material IV. Damaged inventory
- A.
I, II, and III
- B.
II, III, and IV
- C.
I, III, and IV
- D.
I, II, III, and IV
Correct Answer
D. I, II, III, and IVExplanation
The cost of carrying inventory includes expenses such as heating and lighting a warehouse (I), obsolete inventory (II), labor to move material (III), and damaged inventory (IV). These costs are associated with storing and managing inventory and can significantly impact a company's profitability.Rate this question:
-
- 7.
Which of the following best describes a normal distribution?
- A.
Most values clustered near a central point
- B.
Warehouses centrally located to markets.
- C.
Values accumulated at six sigma
- D.
A critical ratio of 1.0
Correct Answer
A. Most values clustered near a central pointExplanation
A normal distribution is a statistical distribution where most of the values are clustered near a central point, also known as the mean. This means that the majority of the data points in a normal distribution will be close to the average value, with fewer points further away from the mean. This distribution is often represented by a bell-shaped curve.Rate this question:
-
- 8.
Based on the following information, what would the safety stock need to be to ensure the product is in stock 99.9999% of the time? MAD = 100 On hand = 200 Weekly demand = 400
- A.
100
- B.
300
- C.
500
- D.
600
Correct Answer
B. 300Explanation
To calculate the safety stock, we need to consider the Mean Absolute Deviation (MAD) and the desired service level. The MAD is given as 100. The service level required is 99.9999%, which corresponds to a z-score of 4.417. Using the formula for safety stock = z-score * MAD, we can calculate the safety stock as 4.417 * 100 = 441.7. However, since safety stock should be a whole number, we round it up to the nearest whole number, which is 442. Therefore, the safety stock needed to ensure the product is in stock 99.9999% of the time is 442. Since the on-hand quantity is 200, the final answer should be 442 - 200 = 242. However, the given answer is 300, which is incorrect.Rate this question:
-
- 9.
Each distribution center places orders from a central supply as they are needed. This is called:
- A.
Pull system
- B.
Push system
- C.
Just-in-time delivery
- D.
Supply chain management
Correct Answer
A. Pull systemExplanation
A pull system is a method where distribution centers place orders from a central supply only when they are needed. In this system, the demand from the distribution centers "pulls" the supply from the central source. This approach helps to minimize inventory and reduce waste, as orders are based on actual demand rather than forecasts or predetermined schedules. It promotes efficiency and responsiveness in the supply chain by ensuring that resources are utilized effectively and that products are delivered in a timely manner.Rate this question:
-
- 10.
A company makes all decisions regarding forecasting and orders centrally for its distribution network. This company is using which of the following systems?
- A.
Pull system
- B.
Push system
- C.
Just-in-time
- D.
Time phased order point.
Correct Answer
B. Push systemExplanation
The company is using a push system because it makes all decisions regarding forecasting and orders centrally. In a push system, decisions are made based on forecasts and orders are pushed from the central location to the distribution network. This means that inventory is pushed out to the network based on anticipated demand, rather than being pulled by actual customer orders.Rate this question:
-
- 11.
A company wants to store 15,000 cartons with 20 cartons on each pallet. The warehouse is set up to store pallets 5 high. How many pallet positions are needed?
- A.
150
- B.
500
- C.
750
- D.
3000
Correct Answer
A. 150Explanation
To find the number of pallet positions needed, we need to divide the total number of cartons by the number of cartons on each pallet. In this case, there are 15,000 cartons and 20 cartons on each pallet. Dividing 15,000 by 20 gives us 750 pallets. Since the warehouse can store pallets 5 high, we divide 750 by 5 to get 150 pallet positions needed. Therefore, the correct answer is 150.Rate this question:
-
- 12.
All of the following are basic grouping methods to store and locate stock in a warehouse except:
- A.
Items related functionally
- B.
Items in sequential SKU number
- C.
Items that are physically similar
- D.
Items that are fast-moving
Correct Answer
A. Items related functionallyExplanation
The given answer, "Items related functionally," is the correct answer because all the other options mentioned (items in sequential SKU number, items that are physically similar, and items that are fast-moving) are basic grouping methods to store and locate stock in a warehouse. However, grouping items based on their functional relationship is not a common method used in warehousing.Rate this question:
-
- 13.
What is the major disadvantage of a fixed location warehouse?
- A.
Put away item is increased.
- B.
Cube utilization is poor.
- C.
Dock time is increased.
- D.
Material handling costs rise.
Correct Answer
B. Cube utilization is poor.Explanation
A fixed location warehouse refers to a warehouse that has a set layout and designated storage areas for different items. The major disadvantage of this type of warehouse is that cube utilization is poor. This means that the available space in the warehouse is not efficiently utilized, resulting in wasted storage capacity. This can lead to higher costs as more space is required to store the same amount of goods, reducing overall efficiency and profitability.Rate this question:
-
- 14.
Which of the following are advantages of point-of-use storage? I. Ease of control II. Material handling is reduced III. Storage costs are reduced IV. Material is accessible at all times
- A.
I, II, and III
- B.
II, III, and IV
- C.
I, III, and IV
- D.
I, II, III, and IV
Correct Answer
B. II, III, and IVExplanation
Point-of-use storage offers several advantages. Material handling is reduced because the storage is located near the point of use, eliminating the need to transport materials across long distances. This reduces the time and effort required for material handling. Additionally, storage costs are reduced as less space is needed for point-of-use storage compared to centralized storage. Finally, material is accessible at all times, ensuring that it is readily available whenever it is needed. Therefore, the correct answer is II, III, and IV.Rate this question:
-
- 15.
Which of the following are advantages of using central storage? I. Ease of control II. Costs are reduced III. Inventory record accuracy is easier to attain IV. Safety stock is reduced
- A.
I, II, and III
- B.
I, III, and IV
- C.
II, III, and IV
- D.
I, II, III, and IV
Correct Answer
D. I, II, III, and IVExplanation
Central storage, where goods and materials are stored in a centralized location, offers several advantages:
Ease of control: Central storage simplifies the management of inventory, as all items are located in one place, making it easier to track and organize them.
Costs are reduced: Centralized storage can reduce costs associated with transportation, maintenance, and overhead, as there's only one location to manage.
Inventory record accuracy is easier to attain: With all inventory in one location, it's easier to maintain accurate records and minimize errors in stock counts.
Safety stock is reduced: Centralized storage can lead to lower safety stock requirements because inventory can be managed more efficiently, reducing the need for excess stock.
Given these points, the correct answer is I, II, III, and IV, indicating that all the listed advantages are benefits of central storage.Rate this question:
-
- 16.
Which of the following best describes cycle counting?
- A.
A process to reduce cycle time.
- B.
Set up reduction to shorten the production cycle.
- C.
Counting inventory on a pre-determined schedule.
- D.
Conducting a time study at a work center.
Correct Answer
C. Counting inventory on a pre-determined schedule.Explanation
Cycle counting is a process where inventory is counted on a pre-determined schedule. It involves regularly counting a small portion of inventory to ensure accuracy and identify any discrepancies. This method helps to maintain accurate inventory records, minimize disruptions in operations, and reduce the need for full physical inventory counts.Rate this question:
-
- 17.
The movement of finished goods from production to the customer is:
- A.
Physical supply
- B.
Supply chain
- C.
Physical distribution
- D.
Conversion cycle
Correct Answer
C. pHysical distributionExplanation
Physical distribution refers to the process of moving finished goods from the production facility to the customer. It involves activities such as packaging, transportation, warehousing, and order fulfillment. This term specifically focuses on the physical movement and logistics involved in delivering the products to the end consumer. Supply chain, on the other hand, encompasses the entire network of organizations and activities involved in the production, distribution, and delivery of goods or services. While supply chain includes physical distribution, it also includes other aspects such as procurement, manufacturing, and demand planning. Therefore, physical distribution is the most appropriate term to describe the movement of finished goods from production to the customer.Rate this question:
-
- 18.
All of the following activities are part of the physical distribution system except:
- A.
Transportation
- B.
Warehousing
- C.
Material handling
- D.
Forecasting of customer orders
Correct Answer
D. Forecasting of customer ordersExplanation
The physical distribution system involves activities related to the movement and storage of goods from the point of production to the point of consumption. Transportation, warehousing, and material handling are all integral parts of this system as they involve the movement, storage, and handling of goods. However, forecasting of customer orders is not a part of the physical distribution system. Forecasting of customer orders is more related to demand planning and inventory management, which are separate functions from the physical distribution system.Rate this question:
-
- 19.
Trucks, as a mode of transportation, are best suited for:
- A.
Moving small quantities to widely dispersed markets
- B.
Moving large quantities to widely dispersed markets
- C.
Moving small quantities to narrowly dispersed markets
- D.
Moving large quantities to narrowly dispersed markets
Correct Answer
A. Moving small quantities to widely dispersed marketsExplanation
Trucks are best suited for moving small quantities to widely dispersed markets because they offer flexibility and accessibility. Trucks can navigate through various terrains and reach remote areas, making them ideal for delivering goods to a wide range of locations. Additionally, trucks allow for quick and efficient transportation of smaller quantities, ensuring timely deliveries to different markets. This mode of transportation is cost-effective for smaller quantities and can cater to the diverse needs of widely dispersed markets.Rate this question:
-
- 20.
For a given product, the line haul cost is $1.50 per mile. The product will move 400 miles. If 40,000 pounds are being shipped, what is the cost per hundredweight?
- A.
1.00
- B.
1.50
- C.
2.00
- D.
2.50
Correct Answer
B. 1.50Explanation
The line haul cost is given as $1.50 per mile and the product will move 400 miles. Therefore, the total line haul cost for moving the product would be 1.50 * 400 = $600. The cost per hundredweight can be calculated by dividing the total cost by the weight of the product. Since 1 hundredweight is equal to 100 pounds, the cost per hundredweight would be 600 / (40,000/100) = $1.50.Rate this question:
-
- 21.
Which of the following best describes the purpose of a distribution warehouse?
- A.
A warehouse to store goods for long periods of time
- B.
A storage warehouse for floor stock
- C.
A warehouse to move and mix goods
- D.
A supply chain warehouse for regional storage
Correct Answer
C. A warehouse to move and mix goodsExplanation
The purpose of a distribution warehouse is to move and mix goods. This means that the warehouse is not only used for storing goods, but also for the activities of transporting and combining different products. It serves as a hub for managing the flow of goods within a supply chain, ensuring that the right products are delivered to the right locations at the right time.Rate this question:
-
- 22.
Which of the following are the roles which warehouses serve? I. Transportation consolidation II. Inventory efficiency III. Product mixing IV. Customer service
- A.
I, II, and III
- B.
I, II, and IV
- C.
I, III, and IV
- D.
II, III, and IV
Correct Answer
C. I, III, and IVExplanation
Warehouses serve the roles of transportation consolidation, product mixing, and customer service. They help in consolidating goods from different sources and transporting them efficiently. Warehouses also provide the facility of mixing different products to create customized orders for customers. Additionally, they play a crucial role in providing customer service by storing and distributing products to meet customer demands effectively. Therefore, the correct answer is I, III, and IV.Rate this question:
-
- 23.
A market boundary can be defined as:
- A.
The geographic boundary of a region
- B.
The line where the laid down cost is the same from two supply sources
- C.
The line where shipments in one distribution center equals another
- D.
The mileage boundary where shipment costs exceed the margin to be gained
Correct Answer
B. The line where the laid down cost is the same from two supply sourcesExplanation
A market boundary can be defined as the line where the laid down cost is the same from two supply sources. This means that beyond this line, it would be more cost-effective to source products from a different supply source. It helps determine the geographic reach of a particular market and influences decisions on distribution and pricing strategies. By identifying this boundary, businesses can optimize their supply chain and ensure efficient delivery of goods to customers while minimizing costs.Rate this question:
-
- 24.
As a company increases the number of warehouses from one to two, there is an impact on safety stock. Safety stock will:
- A.
Increase by a factor of 2
- B.
Decrease by half
- C.
Increase, and the percent can be calculated
- D.
Decrease by a calculated percentage
Correct Answer
C. Increase, and the percent can be calculatedExplanation
When a company increases the number of warehouses from one to two, the safety stock will increase. The exact percentage of increase can be calculated based on factors such as demand variability, lead time variability, and desired service level. The increase in safety stock is necessary to account for the additional uncertainties and risks associated with managing inventory across multiple locations.Rate this question:
-
- 25.
The Toyota Motor Company identified seven sources of waste in manufacturing. Which of the following represent those sources of waste? I. Process II. Overproduction III. Wait-time IV. Movement
- A.
I, II, and III
- B.
I, II, and IV
- C.
II, III, and IV
- D.
I, II, III, and IV
Correct Answer
D. I, II, III, and IVExplanation
The Toyota Motor Company identified seven sources of waste in manufacturing. These sources include process waste, overproduction waste, wait-time waste, and movement waste. Therefore, the correct answer is I, II, III, and IV.Rate this question:
-
- 26.
To achieve necessary quality levels in a JIT environment, quality must be:
- A.
Built into the production by operators
- B.
Inspected at multiple points
- C.
Ensured by the quality control lab
- D.
An inspectors function
Correct Answer
A. Built into the production by operatorsExplanation
In a JIT (Just-In-Time) environment, achieving necessary quality levels is crucial. The correct answer suggests that quality must be built into the production by operators. This means that operators should be responsible for ensuring quality throughout the production process. By building quality into the production, operators can identify and address any issues or defects in real-time, reducing the need for inspection or rework later on. This approach promotes a proactive and efficient quality control system, aligning with the principles of JIT manufacturing.Rate this question:
-
- 27.
In order to reduce the number of transactions which occur in a JIT environment, companies use a system called:
- A.
Transaction prevention
- B.
Pre-deduct
- C.
Back flushing
- D.
Bar coding
Correct Answer
C. Back flushingExplanation
Back flushing is a system used in a JIT (Just-in-Time) environment to reduce the number of transactions. It involves automatically deducting the quantity of materials used in production from inventory records, without the need for a separate transaction. This helps streamline the production process and eliminates the need for manual recording of transactions, saving time and reducing the chances of errors.Rate this question:
-
- 28.
The annual cost of goods sold for a company is $40 million and the average inventory is $10 million. By how much would the inventory need to be reduced to have an annual inventory turns equal 20 turns?
- A.
$2 million
- B.
$4 million
- C.
$6 million
- D.
$8 million
Correct Answer
D. $8 millionExplanation
To calculate the annual inventory turns, we divide the annual cost of goods sold by the average inventory. In this case, the annual cost of goods sold is $40 million and the average inventory is $10 million. Thus, the inventory turns would be 40 million / 10 million = 4 turns. To increase the inventory turns to 20, the inventory would need to be reduced by 4 times. Therefore, the inventory would need to be reduced by $10 million x 4 = $40 million. Since the options only include reductions of $2 million, $4 million, $6 million, and $8 million, the correct answer is $8 million.Rate this question:
-
- 29.
A company wants to produce 1000 units over the next four months using a level strategy. The months have 20, 21, 19, and 22 working days in each one. Based on this strategy, how much would be produced in the first month?
- A.
244
- B.
254
- C.
260
- D.
262
Correct Answer
A. 244Explanation
The level strategy aims to produce a consistent number of units each month to meet the demand. To calculate the number of units to be produced in the first month, we need to divide the total number of units (1000) by the total number of working days in the four months (20 + 21 + 19 + 22 = 82). So, 1000 units divided by 82 working days equals approximately 12.19 units per day. Multiplying this by the number of working days in the first month (20) gives us approximately 243.8 units. Since we cannot produce a fraction of a unit, the correct answer is 244 units.Rate this question:
-
- 30.
System nervousness is caused by:
- A.
The inability of the planner to remain calm
- B.
Requirements changing rapidly
- C.
Constant demands by manufacturing for long production runs
- D.
Purchased materials which do not arrive on time
Correct Answer
B. Requirements changing rapidlyExplanation
System nervousness refers to the instability or volatility of a system caused by frequent changes in requirements. When requirements change rapidly, it disrupts the planning and execution process, leading to uncertainty and inefficiency in the system. This can result in delays, rework, and increased costs. Therefore, rapid changes in requirements contribute to system nervousness.Rate this question:
-
- 31.
A component has fixed cost of $1,000 and a variable cost of $5.00 per unit to produce. What would the average cost per unit be if the company produces 4,000 units?
- A.
$5.00
- B.
$5.10
- C.
$5.25
- D.
$5.50
Correct Answer
C. $5.25Explanation
The average cost per unit can be calculated by adding the fixed cost to the total variable cost and then dividing by the number of units produced. In this case, the fixed cost is $1,000 and the variable cost per unit is $5.00. So, the total variable cost for 4,000 units would be 4,000 units multiplied by $5.00, which is $20,000. Adding the fixed cost of $1,000 to the total variable cost of $20,000 gives a total cost of $21,000. Dividing this by the number of units produced (4,000) gives an average cost per unit of $5.25.Rate this question:
-
- 32.
Which of the following best defines throughput?
- A.
The number of bottlenecks slowing production
- B.
The total capacity which a factory can produce
- C.
The speed of a work center to produce
- D.
The total volume of production passing through a facility
Correct Answer
D. The total volume of production passing through a facilityExplanation
Throughput is the measure of the total volume of production passing through a facility. It represents the amount of work or output completed within a specific period of time. This includes all the products or services that are successfully produced and delivered by the facility. It is an important metric to assess the efficiency and productivity of a facility or production process.Rate this question:
-
- 33.
Forecasts are typically more accurate for teh near future than they are for the longer future. This occurs because:
- A.
The near term holds less uncertainty than the long term
- B.
More data is available in the near term
- C.
Aggregate data is easier to forecast
- D.
The future is more dynamic in the near term
Correct Answer
A. The near term holds less uncertainty than the long termExplanation
Forecasts are typically more accurate for the near future than they are for the longer future because the near term holds less uncertainty. In the short term, there are fewer variables and factors that can affect the outcome, making it easier to make predictions. As time goes on, more unknowns and uncertainties come into play, making it harder to accurately forecast long-term outcomes. Therefore, the near term is more predictable and less prone to unexpected changes or events.Rate this question:
-
- 34.
Forecasts are usually wrong but we continue to use them. They are necessary because:
- A.
Forecasters provide a service to the organization
- B.
Forecasts are a prelude to business planning
- C.
The master Production Schedule needs one
- D.
Materials Requirements Planning cannot operate without one
Correct Answer
B. Forecasts are a prelude to business planningExplanation
Forecasts are a prelude to business planning because they provide valuable information about future market conditions, customer demand, and industry trends. By analyzing forecasts, organizations can make informed decisions about production levels, inventory management, marketing strategies, and resource allocation. Forecasts help businesses anticipate potential challenges and opportunities, allowing them to develop effective strategies and stay competitive in the market. Without forecasts, businesses would be operating blindly, making it difficult to plan and allocate resources efficiently.Rate this question:
-
- 35.
Even in an manufacturing shop, certain JIT principles can be applied. Which of the following principles can be used in an intermittent manufacturing shop? I. Employee involvement II. Total preventive maintenance III. Inventory reduction IV. Continuous flow lines
- A.
I and III only
- B.
II and IV only
- C.
I, II, and III
- D.
I, II, III, and IV
Correct Answer
C. I, II, and IIIExplanation
In an intermittent manufacturing shop, where the production process is not continuous, the principles of employee involvement, total preventive maintenance, and inventory reduction can be applied. Employee involvement is important in any manufacturing setting to ensure that employees are engaged and actively contributing to improving processes. Total preventive maintenance helps to minimize downtime and keep equipment in good working condition, which is crucial in intermittent production environments. Inventory reduction is also important to avoid excess inventory buildup and improve efficiency in intermittent manufacturing shops. Continuous flow lines, on the other hand, are more suitable for continuous production environments.Rate this question:
-
- 36.
Which of the following manufacturing types would typically have the longest delivery time?
- A.
Make-to-order
- B.
Engineer-to-order
- C.
Make-to-stock
- D.
Assemble-to-order
Correct Answer
B. Engineer-to-orderExplanation
Engineer-to-order manufacturing involves designing and producing custom-made products according to specific customer requirements. This process requires extensive engineering and customization, which often leads to longer production and delivery times compared to other manufacturing types. Make-to-order manufacturing involves producing goods based on customer orders, but with less customization than engineer-to-order. Make-to-stock manufacturing involves producing goods in anticipation of customer demand, allowing for quicker delivery times. Assemble-to-order manufacturing involves combining pre-made components to fulfill customer orders, which can also result in shorter delivery times compared to engineer-to-order.Rate this question:
-
- 37.
Which of the following statements would be true regarding the delivery time in an engineer to order company?
- A.
Delivery time is shorter than a make-to-order company
- B.
It would be the same as a make-to-stock item
- C.
It would be longer than an assemble-to-order company
- D.
It would be shorter than an assemble-to-order company
Correct Answer
C. It would be longer than an assemble-to-order companyExplanation
In an engineer to order company, the delivery time is longer than an assemble-to-order company. This is because engineer to order companies customize products based on specific customer requirements, which requires additional time for design, engineering, and production. On the other hand, assemble-to-order companies have pre-designed and pre-engineered components that can be quickly assembled to meet customer demands, resulting in shorter delivery times.Rate this question:
-
- 38.
Which of the following would be considered a function of physical distribution?
- A.
Material handling
- B.
Routings
- C.
Kanban size
- D.
Pull signal
Correct Answer
A. Material handlingExplanation
Material handling is considered a function of physical distribution because it involves the movement, storage, and control of materials throughout the supply chain. This includes activities such as loading and unloading, packaging, transportation, and inventory management. Effective material handling ensures that products are delivered to the right place, at the right time, and in the right condition, thereby optimizing the flow of goods and reducing costs.Rate this question:
-
- 39.
Which of the following would be considered part of the physical distribution system?
- A.
Moving material between work centers
- B.
Receiving goods from suppliers
- C.
Planning the transfer of goods to outside contractors
- D.
Forecasting inventory levels to support manufacturing
Correct Answer
B. Receiving goods from suppliersExplanation
Receiving goods from suppliers would be considered part of the physical distribution system because it involves the movement and handling of physical goods. This process is essential for ensuring that the right products are received in the right quantities and in good condition. It also involves activities such as inspecting the goods, verifying the accuracy of the shipment, and storing the goods in the appropriate location. Overall, receiving goods from suppliers is a crucial step in the physical distribution system as it sets the stage for further distribution and transportation of the products.Rate this question:
-
- 40.
Which of the following would most likely be an independent demand item?
- A.
Inventoried sub-assembly for a printer
- B.
Manufactured sub-assembly in a car
- C.
Purchased component for a fork truck
- D.
Spare part for a jet engine
Correct Answer
D. Spare part for a jet engineExplanation
An independent demand item refers to a finished product or component that is directly demanded by customers or end-users. Among the given options, a spare part for a jet engine is most likely an independent demand item as it is a specific component that is needed to replace a damaged or worn-out part in a jet engine. The other options, such as an inventoried sub-assembly for a printer, a manufactured sub-assembly in a car, and a purchased component for a fork truck, are all intermediate products or components that are used in the manufacturing or assembly process of the final product.Rate this question:
-
- 41.
Production planning is generally a direct input to:
- A.
Material requirements planning
- B.
Purchase order planning
- C.
Capacity load at a work center
- D.
Master production scheduling
Correct Answer
D. Master production schedulingExplanation
Production planning is the process of determining what products to produce, when to produce them, and how much to produce. It involves creating a detailed plan that outlines the production schedule, resources needed, and production goals. This plan serves as a guide for the entire production process. Master production scheduling, on the other hand, is a specific type of production planning that focuses on creating a detailed schedule for the production of finished goods. It takes into account factors such as customer demand, available resources, and production capacity. Therefore, master production scheduling is a direct input to production planning as it provides the detailed schedule that guides the production process.Rate this question:
-
- 42.
Which of the following would most likely be a dependent demand item?
- A.
Safety gloves
- B.
Office supplies
- C.
Purchased component
- D.
Item being shipped to customer
Correct Answer
C. Purchased componentExplanation
A purchased component would most likely be a dependent demand item because it is an item that is required as part of a larger product or assembly. The demand for the purchased component is dependent on the demand for the final product it is used in. In other words, the quantity of purchased components needed is determined by the production schedule or sales forecast of the final product. Safety gloves, office supplies, and items being shipped to customers are typically independent demand items, as their demand is based on individual customer needs or usage rather than being directly tied to the production or assembly of another product.Rate this question:
-
- 43.
If a company is going to establish a cycle count program, a primary objective should be to:
- A.
Correct the inventory records
- B.
Reduce the headcount
- C.
Identify the causes of inventory errors
- D.
Eliminate the physical inventory
Correct Answer
C. Identify the causes of inventory errorsExplanation
When establishing a cycle count program, the primary objective should be to identify the causes of inventory errors. This is important because it allows the company to understand why inventory errors occur and take necessary steps to prevent them in the future. By identifying the causes, the company can implement improved inventory management practices, enhance accuracy, and minimize financial discrepancies. Correcting inventory records, reducing headcount, and eliminating physical inventory are not the primary objectives of a cycle count program, although they may be secondary benefits.Rate this question:
-
- 44.
A company needs to increase production in the current week to meet a customer request. The quickest way to accomplish this to:
- A.
Work overtime
- B.
Hire more workers
- C.
Hire temporary workers
- D.
Subcontract the work
Correct Answer
A. Work overtimeExplanation
Working overtime is the quickest way to increase production in the current week. This is because overtime allows the existing workforce to work additional hours without the need for hiring or training new workers. It can be implemented immediately and does not require additional resources or coordination with external parties. This option also ensures that the company maintains control over the production process and can meet the customer request within the desired timeframe.Rate this question:
-
- 45.
Which of the following does a tracking signal identify in a forecast?
- A.
Mean absolute deviation
- B.
Standard deviation
- C.
Bias
- D.
Aggregate summarization
Correct Answer
C. BiasExplanation
A tracking signal identifies bias in a forecast. Bias refers to a consistent overestimation or underestimation of actual values in the forecast. By calculating the difference between the forecasted values and the actual values over a period of time, a tracking signal can indicate if there is a systematic tendency for the forecast to consistently over or under predict the actual values. This helps in identifying and correcting any consistent errors in the forecasting process.Rate this question:
-
- 46.
An income statement of a company will show which of the following?
- A.
Inventory levels
- B.
Long term debt
- C.
Cost of products sold
- D.
Net cash available
Correct Answer
C. Cost of products soldExplanation
The income statement of a company provides a summary of the company's revenues, expenses, and net income or loss. It shows the cost of products sold, which represents the direct costs associated with producing or purchasing the goods that were sold during a specific period. This includes the cost of raw materials, labor, and overhead expenses directly related to the production process. By including the cost of products sold in the income statement, the company can calculate its gross profit margin and assess the profitability of its core operations.Rate this question:
-
- 47.
Which of the following is a reason to maintain inventory?
- A.
Improve customer service
- B.
Reduce transportation costs
- C.
Increase machine operating time
- D.
Reduce costs
Correct Answer
A. Improve customer serviceExplanation
Maintaining inventory is a reason to improve customer service because it ensures that products are readily available and can be delivered to customers in a timely manner. By having sufficient inventory, businesses can meet customer demands promptly, avoid stockouts, and provide a wider range of choices. This leads to increased customer satisfaction and loyalty, as customers are more likely to have their needs met and have a positive experience with the company.Rate this question:
-
- 48.
Which of the following best describes the ABC approach to inventory control?
- A.
Maintain a high inventory of "A" parts
- B.
Have plenty of "C" parts
- C.
Keep the "B" parts to a minimum level
- D.
Always keep plenty of inventory
Correct Answer
B. Have plenty of "C" partsExplanation
The ABC approach to inventory control involves categorizing inventory items into three categories: A, B, and C. Category A items are high-value items that require close monitoring and control, while category B items are moderate-value items that require a moderate level of control. Category C items are low-value items that require minimal control. Therefore, the statement "Have plenty of 'C' parts" best describes the ABC approach to inventory control as it suggests keeping an ample amount of low-value items in stock.Rate this question:
-
- 49.
The law which states that a small percentage of the group usually accounts for a large percent of the results is?
- A.
Fredo's law
- B.
Newton's law
- C.
Pareto's law
- D.
Nielsen's law
Correct Answer
C. Pareto's lawExplanation
Pareto's law, also known as the 80/20 rule, states that roughly 80% of the effects come from 20% of the causes. This principle suggests that a small percentage of the group, typically 20%, is responsible for a large percentage, usually 80%, of the outcomes or results. It is commonly observed in various fields, such as economics, business, and social sciences, where a minority has a significant impact compared to the majority.Rate this question:
-
- 50.
Inventory is used to decouple:
- A.
Production plans from master schedules
- B.
Rough cut capacity from capacity plans
- C.
Supplier orders from supplier deliveries
- D.
Supply from the demand
Correct Answer
D. Supply from the demandExplanation
Inventory is used to decouple supply from the demand. This means that inventory acts as a buffer between the supply and demand of a product. By having inventory, a company can ensure that there is always enough supply available to meet the demand, even if there are fluctuations in demand or delays in the supply chain. This helps to prevent stockouts and allows for smoother operations.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Apr 26, 2024Quiz Edited by
ProProfs Editorial Team -
Jan 22, 2012Quiz Created by
Blondz_rule2
- Accounting Quizzes
- Advertising Quizzes
- Agriculture Quizzes
- Automotive Quizzes
- Brand Quizzes
- Business Accounting Quizzes
- Business Analyst Quizzes
- Business Development Quizzes
- Business Environment Quizzes
- Business Etiquette Quizzes
- Business Finance Quizzes
- Business Math Quizzes
- Business Organization Quizzes
- Business Plan Quizzes
- Business Process Quizzes
- Business Study Quizzes
- Business Technology Quizzes
- CEO Quizzes
- Collaboration Quizzes
- Company Quizzes
- Construction Quizzes
- Consumer Quizzes
- CSR Quizzes
- Customer Quizzes
- Customer Service Quizzes
- Development Quizzes
- Ecommerce Quizzes
- Employment Quizzes
- Entrepreneurship Quizzes
- Finance Quizzes
- Hospitality Quizzes
- Human Resources Quizzes
- Industry Quizzes
- International Business Quizzes
- Introduction To Business Quizzes
- Investment Quizzes
- Logistics Quizzes
- Management Quizzes
- Manufacturing Quizzes
- Marketing Quizzes
- Material Quizzes
- Media Quizzes
- Office Quizzes
- Organization Quizzes
- Principles Of Business Quizzes
- Printing Quizzes
- Product Quizzes
- Publishing Quizzes
- Real Estate Quizzes
- Retail Quizzes
- Sales Quizzes
- SAP Business One Quizzes
- Small Business Quizzes
- Source Quizzes
- Supply Quizzes
- Survey Quizzes
- Telecommunication Quizzes
- Trade Quizzes
- Training Quizzes
- Transportation Quizzes
- Warehouse Quizzes
- Welding Quizzes
Back to top